The extruder is equipped with a vent port behind the feed hopper

The extruder is equipped with a vent port behind the feed hopper. of pellets, the dry ice trap is found to contain approximately 22 ml of water in addition to polyester fines. In a standard vented extruder, the surface moisture is already blended into the polymer before reaching the vent causing some hydrolysis degradation. After extruding about … (阅读全文)

浏览: 0 没有评论

It is apparent from the above there exists a need in the art for an extruder which is capable of increased dispersive and distributive mixing

It is apparent from the above there exists a need in the art for an extruder which is capable of increased dispersive and distributive mixing. Some degree of mixing between unmelted solids with the melt may occur in the transition zone itself. There are several limitations in such an extruder screw. The baffle locations are alternated periodicall… (阅读全文)

浏览: 0 没有评论

The report begins with a brief overview of the Global Screw Conveyor market

The report begins with a brief overview of the Global Screw Conveyor market and then moves on to evaluate the key trends of the market.. Global market analysis and Chinese domestic market analysis are Bimetallic Barrel provided with a focus on history, developments, trends and competitive landscape of the market. Drivers, restraints, opportunitie… (阅读全文)

浏览: 2 没有评论