Best key programming tool review

字体 -

Car key programming tool are ultra portable immobilizers and key programming devices, which provide customers with professional key programming, pin code reading etc. They can meet the actual needs of different users like locksmiths and car key shops.

The brands of car key programmers we offer cover Autel IM608 & IM508, Xhorse VVDI2 / VVDI MB / VVDI BMW tool, obdstar X300 DP Plus, Lonsdor, Yanhua Mini ACDP, Tango, Xtool X100 Pad 2, XTOOL X100 Pro2, Autek iKey820 etc., which support the majority of car keys from European, American, Asian and Chinese vehicles.

Autel IM608 review

I own the Autel MaxiIM IM608. I purchased it because I wanted to do more key programming. My first vehicle I used it on, was a 2015 Fiat 500 NEC MCU in BCM. I could not find PIN in NEC, I was able to read with VVDI prog. So I purchased the Autel IM608, it was able to read pin no problem. Went to precode the transponder (Dealer key would have worked no problem but I was using aftermarket) and the IM608 would not get the needed information from IMMO (said Failed, Locked BCM, had to disconnect battery to regain communication).

VVDI2 review:
1) if you buy FULL vvdi 2 you get bmw with it.
vvdi mb , you need to weigh up if it will pay its way , will you get enough Mercedes at good enough rates to get payback , and on NI rates what risks are you prepared to take with cars up to 50k value.
everything comes down to payback , and risk vs profit at end of day , only got to kill one car to kill alot of profit to claw back, though in NI , kill someone’s merc you may book that body bag .

vvdi bmw tool reviews

-> Support instrument cluster memory M35080 v6 – done
-> Key programming in 2004 E60 with CAS2 successful.
-> I was able to connect and code the test kit I built with cas3, kgm, kombi, ahl, where communication is via d-can cable. I was able to code two controllers and program the meter. In fact, before these activities, the program downloaded data from the internet. Today I tried to connect to E83 and failed, and should also code this car. We managed to change the mileage in CAS3 through obd and change the mileage from read m35080v6 memory. For now, I have not tried to do more on the car.

obdstar review:

1. Obdstar is very good
a good price… and works very well. really is very good for the price.
2. I have xpad 2 and compared to obdstar DP Plus…. OBDSTAR is superior… works very well Fiat Renault BMW and other brands that are not easy to work with another team.
Also much better than Autel IM608.
3. I use X300DP and am very happy with it.Most Asian cars, and key programming on newer cars (except VAG BMW MB) are done with this one for me.
4. One my first tool was the Xtool pro pad. it’s an ok tool but I am not impressed, I looked at the obdstar and looks very similar to the pro pad, thus I am assuming would be a little bit different but not by much. My good friend of mine has the OBDSTAR. I have programmed like two keys and have not use the tool that much to say if it’s a good or not.
5. I think OBDSTAR after experience has many advantage than Xtool pro pad and Autel im608 especially for Japanese car and Europe car , it worth to test.



    1 条评论

  1. 1. Lena Toomer - 2021年4月27日 21:17

    Wonderful items from you, man. I have take into account your stuff prior to and you are just too wonderful. I really like what you have obtained right here, certainly like what you’re saying and the way in which in which you assert it. You are making it entertaining and you still take care of to keep it sensible. I can not wait to learn much more from you. That is actually a tremendous web site.